휴대형 대기중 수은농도 측정 장치 Model 431   초정밀도 (0.013ug/m3) 측정장치  Model J 405

적용대상
  • Mercury Surveys and Soil Screening
  • Spill Response
  • Ensure Worker Safety
  • Research Projects for Stack, Flue and Natural Gas
  • Hazardous Waste Sites
  • Mercury Exclusion Tests
  • Monitor Disposal and Recycling of Fluorescent Lamps
  • Exhaust Duct Analysis

사양
Resolution 0.001 mg/m3    (405 0.013ug/m3)
Detection Range 0.003-0.999 mg/m3 (405 999 ug/m3)
Precision 5% Relative Standard Deviation at 0.100 mg/m3
Accuracy ± 5% at 0.100 mg/m3
Response Time 13 s in Sample Mode; 4 s in Survey Mode
Flow Rate 750 cc/min
Power Requirements 100-120 V ~ 50/60 Hz, 1 A or 220-240 V ~ 50/60 Hz, 1 A
Internal Battery Pack Rechargeable nickel-cadmium
Environmental Range 0-40 °C, noncondensing, nonexplosive
Interfaces RS-232 PC using JCI software
Dimensions 6” W x 13” L x 4” H
Weight 7 lb
Warranty One year, factory parts and labor
Certifications European Communities (CE) for 220-240 V~ model only

                           대기중 악취 (H2S)농도 추적 검출장치 Model 631

사용처
  • Ambient Air Analysis
  • Odor Nuisance Monitoring
  • Regulatory Compliance
  • Control Room Corrosion Monitoring
  • Quality Control
  • Scrubber Efficiency Testing
  • Accuracy Check for other Hydrogen Sulfide Monitors and Control Systems
  • Hydrogen Sulfide Source Detection
  • Leak Detection
  • Applied Research Projects

사양
Resolution 0.001 at Range 0 to 0.1 ppm at Range 3
Detection Range 0.003-50 ppm
Precision 5% Relative Standard Deviation
Accuracy Range 0: ±0.003 ppm at 0.050 ppm
Range 1: ±0.03 ppm at 0.50 ppm
Range 2: ±0.3 ppm at 5.0 ppm
Range 3: ±2 ppm at 25 ppm
Response Time
Sample Mode:
10-50 ppm in 13 s
1.0-10.0 ppm in 16 s
0.10-1.00 ppm in 25 s
0.001-0.100 ppm in 30 s 		Survey Mode:
10-50 ppm in 3 s
1.0-10.0 ppm in 6 s
0.10-1.00 ppm in 15 s
0.001-0.100 ppm in 20 s
Flow Rate 150 cc/min or 0.15 l/min
Power Requirements 100-120 V ~ 50/60 Hz, 1 A or 220-240 V ~ 50/60 Hz, 1 A
Internal Battery Pack Rechargeable nickel-cadmium
Environmental Range 0-40 °C, noncondensing, nonexplosive
Interfaces RS-232 PC using JCI software
Dimensions 6” W x 13” L x 4” H
Weight 7 lb
Warranty One year, factory parts and labor
Certifications European Communities (CE) for 220-240 V~ model only

 수분함유량, 고체함유량, 재 함유량 분석 장치  Model Max 5000

MAX 5000 사양
Sample Size 200 mg to 100 g
Resolution Moisture: 0.0001%; Balance: 0.0001g
Moisture/Solids Range 0.1% to 99.9%
Dry Weight Range 0-300%
Results Display % Moisture, % Solids, % Ash or % Dry Weight
Ending Criteria Predict (Auto or Manual), Rate, Time, Rate of Time or Reliability
Heating Range 25 - 600°C, Set in 1°C increments and maintained to ±1°C within the range of 50 - 300°C; ±2°C within the range of 300 - 600°C
Test Parameter Memory 250 Programs
Program Identification Alphanumeric; programmable prompts for lot or product ID numbers
Test Result Memory Data from last 1,000 tests and graphs from last 100 tests
Statistical Calculation Mean, Standard Deviation, and Relative Standard Deviation
Power Requirements 100-120V ~ 50/60 Hz, 1 amp (standby) or 8 amps (heat on)
Interfaces RS-232 (9-pin standard); parallel printer (LPT - PC standard);
RJ-45 (Ethernet)
Dimensions 470mm L x 323mm W x 24mm H; 18.5" L x 12".5 W x 10" H
Weight 13.6 kg; 30 lbs
Warranty Two years, factory parts and labor (one year international)
Certifications cULus; CE
Accessories Multi-Point Temperature Calibration Module; Printer; Sample Basket; Validation Package; Step Down Power Transformer